Or if either of those amps could even power those subs? Whats your advice on wiring? Okay, how will imaging be effected by a sub in the corner?
Video of the Day
The only safe way to hook up your gear is to connect each subwoofer to a separate amplifier. Im trying to get my system planned out before I hook up all the gear. Which is the best way to hook them up to get more bass or do I need a bigger amp? Mount your amplifier on a solid surface that will not conduct electricity.
Check out our setting gain article for help. And don't play a lot of distortion trying to get more bass - that'll damage the subs. Is this the best and only safe way to run this with a factory amplifier? According to the specs, you should be alright.
Brand names and model numbers work best. It'll power your speakers and sub from one compact chassis. Have your power wire taunt and find out where your cap. Would running stereo burn up the woofer? If you need to drill a hole in the fire wall, dating be careful not to hit anything on the other side and be sure the drilled hole will not cut through your power line.
- Is there a better way to wire them up without hurting anything or am I better off eliminating a sub?
- If it does, then turn your car off and make sure the amp turns off as well so it doesn't drain your battery.
- Which do u think would be better?
Would there be sufficient power? What independence should i run them at? Then run the remote wire back to the amp and cut it there leaving a foot or so of extra cable.
Originally Posted by tortie Perfectionist want their subs true and center, but in my experience, imaging will not be effected by a sub in a corner. Or, use one positive and one negative amp terminal for the pair of subs, it doesn't matter which. From everything I've read on this site, this should work just fine, if not well, correct? Will this work with this amplifier? Good day, I am looking for some information for wiring my stereo system.
How to hook up a subwoofer to a stereo system
Seeing as both companies make excellent subwoofers, and the specs on the subs are identical, I leave it to you to choose which one. Do I wire a sub to each set? What is your suggestion on wiring? How can I maximize use and which diagram would I use. Another option is a dedicated crossover, but these can be tricky to work with, and quite expensive.
How to Install a Car Amp (with Pictures) - wikiHow
Run the power wire to your amp. This will prevent noise in the system. You can put it through an empty rubber grommet in a factory hole. Include your email address to get a message when this question is answered. Matthew, You could use each of those amplifiers to drive each one of your subs.
How to Hook Up Subwoofers to an Amp
- Most all of them do, in fact, recommend precisely the placement you have adopted.
- The fuse amperage should match the gauge size.
- If there is no available hole, use a power drill and steel bits to drill one.
- Wood, The only safe way to wire that gear together is like this.
- These things are monsters, I'm having trouble finding an amp that can power these things without buying something that has way to much power.
- Another thing to help is to hide it behind something.
You should be able to connect it to the auxiliary on the back of the stereo unit. Also, since this system will require a lot of energy, should I purchase an additional battery for this system? David, What impedance are the subs?
Jesse, The only safe way to connect those subs to that amp is like this. Why buy from an authorized dealer? While your key and radio is on, dating a disconnect and connect the remote wire to the amp.
This means if your sub is only handling the lower frequencies, placement will just affect it's output level and possible room resonances, not imaging. Or would it be a better pairing to purchase a second identical sub and wire in parallel to this amp? If you want a question answered about your system, dating you must identify the gear by model numbers as well as brand names.
How to Connect a Subwoofer to a Receiver or Amplifier
Just cut the power wire, insert the inline fuse and reattach. The sub is rated at w rms. My question is can it be possible to over power the Type R? Brad, In spite of its published specifications, that amplifier doesn't have enough power for one of those subs, local hook up app much less two.
Amp and sub hook up - Warsaw Local
If that lack of power is not an issue, you can wire them together like this. You need to re-set the amplifier's gain, with the bass control at the highest setting you use, so no distortion can ever play. Just match the positive and negatives. So I am looking at another sub or two.
Which should put out maybe Rms? Not knowing exactly which you have makes it impossible to give advice on how to wire them together. Or, you could wire one sub per terminal set, and then run two pairs of wires to the amp, it's electrically the same.
No Diagram Available
You simply connect your speaker outs from your amp to the speaker in of the sub, then connect the speaker outs of your subs to your speakers. Repeat this process for the input gain, and then with all the other components. Subs and amps should be matched as closely as possible for best performance and longevity. And what would be the best way to wire them?
If you want a question answered about your system, you should identify your equipment by brand names and model numbers. Will that give more power? With the above mentioned head unit, which setting should I use? Here's a handy formula for estimating an amplifier's capability.
Now I am confused about amplifier. And also what type of amp would I buy, like mono or. Already answered Not a question Bad question Other. Given the information above, which type of amp do you recommend and why?